SCADA Software

SCADA (supervisory control and data acquisition) generally refers to industrial control systems (ICS): computer systems that monitor and control industrial, infrastructure, or facility-based processes, as described below:
Industrial processes include those of manufacturing, production, power generation, fabrication, and     refining, and may run in continuous, batch, repetitive, or discrete modes.
Infrastructure processes may be public or private, and include water treatment and distribution,     wastewater collection and treatment, oil and gas pipelines, electrical power transmission and     distribution, wind farms, civil defense siren systems, and large communication systems.
Facility processes occur both in public facilities and private ones, including buildings, airports, ships,     and space stations. They monitor and control HVAC, access, and energy consumption.

    A SCADA system usually consists of the following subsystems:
A human-machine interface or HMI is the apparatus which presents process data to a human     operator, and through this, the human operator monitors and controls the process.
A supervisory (computer) system, gathering (acquiring) data on the process and sending commands     (control) to the process.
Remote terminal units (RTUs) connecting to sensors in the process, converting sensor signals to     digital data and sending digital data to the supervisory system.
Programmable logic controller (PLCs) used as field devices because they are more economical,     versatile, flexible, and configurable than special-purpose RTUs.
Communication infrastructure connecting the supervisory system to the remote terminal units.
Various process and analytical instrumentation

The term SCADA usually refers to centralized systems which monitor and control entire sites, or complexes of systems spread out over large areas (anything from an industrial plant to a nation). Most control actions are performed automatically by RTUs or by PLCs. Host control functions are usually restricted to basic overriding or supervisory level intervention. For example, a PLC may control the flow of cooling water through part of an industrial process, but the SCADA system may allow operators to change the set points for the flow, and enable alarm conditions, such as loss of flow and high temperature, to be displayed and recorded. The feedback control loop passes through the RTU or PLC, while the SCADA system monitors the overall performance of the loop.

Proficy iFix SCADA